img_1434
Built up this beast of a 29+ recently for smashing around the woods and bike packing… It’s a tank! I have since upgraded the wheels for Hope Pro 4 Hubs and CX Rays with the same Stans Hugo Rims and it’s now set up tubeless using stans tape and sealant. I drilled the seat tube on the non-drive side near the base of the tube to accommodate internal dropper post routing… The tubes being 4130 butted means they’re plenty strong enough to take a 5mm hole without problems… We’ve figured out that you can run a short cage Zee mech with an 11-42T sunrace 10sp cassette without the need for a longer B-Screw which offers a massive wide range if you want to only run a single ring up front (The Hunt is built to be run single ring only)

Spec below…

Frame/Fork – Hunt 29/29+
Headset – Chris King Inset 7
Stem – 50mm Thomson Elite X4
Bars – Enve Riser 740mm
Grips – ESI Silicone
Brakes – Shimano XT M785 I-Spec-B
Rotors – Shimano XT Ice Tech 6 Bolt
Shifter – Shimano Zee 10sp
Rear Mech – Shimano Zee 10sp Short Cage
Cassette – Sunrace MX3 11-42
Chain – KMC X10.93
Crank – Race Face Deus 104BCD/170mm
Chain Ring – Race Face Wide Narrow 36T
BB – Race Face
Hubs – Novatec D771/772SB
Rims – Stans Hugo 52
Spokes – Sapim Race
Tyres – Panaracer Fat B Nimble 29×3″
Seatpost – KS Lev Integra (Custom drilling to seat tube to accomodate)
Saddle – Fizik Gobi XM
Pedals – Shimano Saint